All posts by premecigadmin

Celebrity Vapors!!

The vaping industry has been growing and expanding rapidly all over the world. Nowadays, you see people vaping just about wherever you go. You see vapors at malls, beaches, parks, bars and everywhere else! Vapors ranging from 18 years of age to their grandma’s and grandpa’s! Not that celebrities aren’t normal people like you and I but they vape too! Different celebrities are like role models to some, so seeing them vape can have an influence on others. Here’s a list of those celebrities who’ve quit those disgusting cigarettes and have switched to vaping.

Leonardo DiCaprio – This guy has been an infatuation for years now and the fact that he traded those cigarettes to being a vapor has made him even more of a heartthrob. Instead of using a cig-a-like, he took another step up and now using a bigger mod!

leo-dicaprio-celeb-vapor

Norman Reedus – I guess you could say people who smoke cigarettes are the walking dead. The reason being, cigarette smokers live about 10 years less than the non-smokers. Good thing that is not the case for this guy.

norman-reedus-celeb-vapor

The Big Show – I’m sure a lot of you know who the Big Show is but in case you don’t, this muscle man is a WWE superstar! Some fans often report seeing him vape on set at WWE events while others actually spot him in a vape shop.

big-show-celeb-vapor

Samuel Jackson – No cig-a-like for this guy! A lot of people like the movie ‘Snakes on a Plane’ mostly because Samuel Jackson is in it. With that being said, be proud to be a vapor because it’s probably the only thing you have in common with this crazed bad ass.

samuel-jackson-celeb-vapor

Katy Perry – She kissed a mod and she liked it! Katy Perry is another celebrity who has been spotted with her mod just vaping away.

katy-perry-celeb-vapor

Dave Navarro – Many of you know Dave Navarro from the rock band Jane’s Addiction, Red Hot Chili Peppers, or from the TV show Ink Master! Just another celebrity who was addicted to cigarettes and switched to vaping as a better alternative.

dave-navarro-celeb-vapor

Johnny Depp – Johnny Depp was seen vaping on set in one of his movies!

johnny-depp-celeb-vapor

Katherine Heigl – This gal did some good for the growing vaping industry by expressing the benefits of vaping on live TV on David Letterman’s show. After discussing these benefits, they became intrigued and started passing her vape around.

katherine-heigl-celeb-vapor

Michelle Rodriguez – This chick has been known to be a real bad ass! When you don’t see her on TV, you can find her vaping away. People have reported her having her mod in her hands at all times.

michelle-rodriguez-celeb-vapor

Willie Nelson – Willie Nelson is seen having a “go big or go home” attitude and vaping is no exception for this rule of his. Posing in this picture with his massive mod that delivers huge clouds.

willie-nelson-celeb-vapor

Justin Bieber – This pop singer was seen leaving a vape shop with his new stainless steel tube mod!

justin-beiber-celeb-vapor

Kylie Jenner – Kylie Jenner’s Snapchat went viral in snowball effect! In this particular video, this chick was blowing O’s like a pro with her vape mod.

kylie-jenner-celeb-vapor

Simon Cowell – Simon Cowell is not known for being the nicest guy on TV but he did do some good by quitting cigarettes and switched to vaping!

simon-cowell-celeb-vapor

The list goes on and on…

These awesome celebs have turned over a new leaf and joined the vaping community!

Chapter 1

ch1header

ch1-1

 

WE’RE SURE YOU’VE HEARD OF AN ECIGARETTE BEFORE AND PROBABLY HAVE SEEN MULTIPLE VARIATIONS. THIS CHAPTER IS GOING TO FOCUS ON THE MOST BASIC FUNCTIONS OF eCIGARETTES and how they WORK. BUT DON’T WORRY, WE ARE GOING TO GUIDE you through the most ADVANCED TYPES in future chapters.



ch1-3

Formula:

  • Power: Lithium ion battery
  • Atomizer: heating wire
  • Wick
  • ELiquid: Flavor

-LITHIUM ION BATTERIES ARE WHAT GIVE THE E-CIGARETTES POWER

– ATOMIZERS ARE WHAT HOUSE THE COILS WHICH ARE MADE OF HEATING WIRE. THIS IS WHAT HEATS THE ELIQUID INTO VAPOR

– THE WICK IS WHAT Holds ELIQUID, USUALLY MADE FROM COTTON

– ELIQUID IS WHAT’S HEATED TO CREATE VAPOR. THIS IS WHERE YOU GET FLAVOR AND NICOTINE

ch1-7

IN ORDER TO HAVE A WORKING E-CIGARETTE, YOU NEED ALL 4 COMPONENTS: BATTERY, ATOMIZER, WICK, AND ELIQUID.

TO PUT IT ALL TOGETHER, THE BATTERY POWERS THE ATOMIZER. THE ATOMIZER HOUSES THE COIL AND WICK. THE WICK IS WHAT HOLDS YOUR ELIQUID. ONCE YOU TAKE A DRAW (OR PRESS THE FIRE BUTTON IF IT HAS A MANUAL SWITCH) FROM YOUR E-CIGARETTE, THE COIL HEATS THE LIQUID TURNING IT UNTO VAPOR.

ch1-9

 

DISPOSABLES ARE THE SIMPLEST FORM OF E-CIGARETTES. THEY’RE an all-in-one, A ONE-TIME USE DEVICE. SO NO RECHARGING, AND NO REFILLING. YOU VAPE IT AND ONCE THERE IS NO MORE ELIQUID, YOU TOSS IT! HENCE THE NAME, DISPOSABLE

CIG-A-LIKES ARE THE NEXT STEP UP from a disposable. THESE ARE ECIGS THAT CLOSELY Resemble A TRADITIONAL CIGARETTE. WITH CIG-A-LIKES THERE IS A Battery, A CARTRIDGE/CARTOMIZER, OR A CLEAROMIZER. THE BATTERIES ARE RECHARGEABLE, THE CARTRIDGES ARE REPLACEABLE, AND THE CLEAROMIZERS ARE REFILLABLE.

EGO BATTERIES ARE ALMOST CIG-A-LIKES BUT THEY’RE SLIGHTLY BIGGER IN WIDTH AND HAVE A DIFFERENT THREADING CONNECTION. THESE BATTERIES ARE RECHARGEABLE AND JUST LIKE THE CIG-A-LIKES, THEY CAN USE A CARTRIDGE/CARTOMIZER OR A CLEAROMIZER.

CARTRIDGES/CARTOMIZERS ARE BASICALLY DISPOSABLE, PRE-FILLED WITH ELIquid, READY TO GO “FILTER” FOR YOUR CIG-A-LIKE OR EGO BATTERY. THESE Contain AN ATOMIZER ATTACHED TO THE BOTTOM AND ELIQUID INSIDE. NOW ONCE THESE no longer contain eliquid, YOU SIMPLY TOSS IT AND TWIST ON A NEW ONE!

CLEAROMIZERS ARE ANOTHER PRODUCT YOU COULD USE FOR CIG-A-LIKES OR EGO BATTERIES. THESE ARE ALMOST LIKE CARTRIDGES/CLEAROMIZERS BUT THESE ARE NOT DISPOSABLE. SO INSTEAD OF HAVING TONS OF CARTRIDGES, YOU’LL HAVE A CLEAROMIZER. But unlike the cartridges, Clearomizers do not have a built-in atomizer. Instead, you purchase coils separately.  Coils typically last up to 2 weeks. as soon as you no longer get the full flavor of eliquid and it tends to have a burnt taste, that is when you want to replace your coil. And ONCE YOUR CLEAROMIZER IS EMPTY, YOU JUST FILL IT BACK UP with more of your favorite eliquid!

MODS ARE E-CIGARETTES FOR MORE ADVANCED USERS. THESE HAVE MANY MANY DIFFERENT SHAPES, SIZES, AND FEATURES. DON’T WORRY, WE’LL GO MORE IN-DEPTH WITH THIS TOPIC LATER.

RBA/RDA’S ARE ATOMIZERS THAT PAIR WITH MODS. RBA STANDS FOR REBUILDABLE ATOMIZER, RDA STANDS FOR REBUILDABLE DRIPPING ATOMIZER, AND there’s also RTA which STANDS FOR REBUILdABLE TANK ATOMIZER. JUST LIKE MODS, WE’LL GO MORE IN-DEPTH WITH THIS TOPIC IN FUTURE CHAPTERS.

ch1-12

 

ch1-4

 

ch1-6

 

 

ch1-11

 

 

ch1-13



Chapter 2

ch2-blog_01

ch2-blog_02

 

A lot of you might wonder… what the heck is in e-liquid? what am I vaping on? It’s all actually pretty simple and this chapter will explain it all to you. We’ll also let you know detail on nicotine levels, how to store it or where to store it, and what steeping is and what it’s purpose is. So if you’re curious, keep reading! 

The ingredients in e-liquid are:

  • water
  • nicotine
  • food flavorings
  • propylene glycol (PG)
  • Vegetable glycerin (VG)

vegetable glycerin (vg) in e-liquid is what provides vapor production while propylene glycol (pg) is the base carrier for flavor and nicotine. Some users can be allergic to PG but not to worry, there are plenty of juices out there that are max vg (meaning it has 100% vg and no pg). some e-liquid bottles have these pg/vg ratios listed on the bottle itself and if not, you can find them on the carrier’s website. 

Nicotine levels are almost always measured in mg/ml. They range from 0-24mg. These levels are labeled on the bottle as 3mg or maybe 12mg. MG is a unit of measure for how much nicotine is in the e-liquid or cartridge. For example, 6MG means 0.6MG of nicotine per mL. (Milliliter). 

Think about a fine wine or whiskey, everyone knows that it tastes better once its aged. Steeping e-liquid allows a process of oxidation to take place in the compounds that are in a state that will react to the introduction of oxygen. Components that are more volatile will evaporate out of the liquid thus changing the flavor of the juice. This can sometimes intensify some of the flavors you thought weren’t so bold before. Now… not all e-liquids will taste better once steeped. There’s really no way to tell unless you actually try it. Some will taste better while others might taste worst.

    ** if you want to learn how to steep your e-liquid, stay tuned and will talk about it in future chapters.

 

When it comes to storing your e-liquid, you never want to keep it in your car or out in the sun. This will cause your juice to become a watery consistency and that’s never good. Especially if you’re putting it in a tank or if it’s a cartridge because it’ll only leak out. You want to keep your juice in room temperature and out of children reach of course.

 






 


Chapter 3

ch3-blog-1_01

ch3-blog-1_02

Considering getting a more advanced style e-cigarette? Or maybe you’re just curious about what they are? In this chapter, we’re going to focus on what an unregulated mod is, what a regulated mod is, how they work, and why you might want to purchase either one of these.

An unregulated mod (mechanical mod) is a device that does not have any wires or regulating chips to regulate power flow through the device. made with a manual switch that is pressed to complete the circuit and constructed with metal in a tube shape or a box. All unregulated mods are designed to be used with rebuildable atomizers, meaning no tanks! because unregulated mods require comprehensive knowledge to be utilized with the utmost safety, they are predominately for the more advanced vape enthusiast.

  • No internal battery means you can upgrade the power performance by purchasing advanced, more powerful batteries
  • Allows for the use of coils with low resistances
  • More control of voltage output (whereas regulated mods have a limit)
  • Potential increase in voltage and wattage
  • Gives you those massive clouds if you’re into cloud chasing

A regulated mod is a device that does contain a circuit board to regulate current. Cig-a-likes, Ego batteries, any pen style e-cigarettes are all regulated but in this chapter, we’re focusing on more advanced types of regulated mods. There are many different types of regulated mods. some having internal batteries and some having external batteries that can be charged separately. These devices feature variable wattage & voltage to allow users to adjust the heat applied to your coils. Meaning, lowering the wattage for a smaller, more cool hit or increasing the wattage for a larger, more warmer vape.

  • More safe than an unregulated mod
  • Potential increase in battery life
  • Easy to use
  • Easy to charge (most charge via usb)
  • Digital display
  • Control of wattage/voltage output by the push of a button

If you’re just now stepping up from a cig-a-like or an Ego, you should start with getting a regulated mod. This is because they’re easier to use, and unregulated mods require comprehensive knowledge of electrical systems as well as ohms’ law to be used safely. You could learn about these types of mods by reading blogs, watching various YouTube videos, or better yet, walk into a vape shop and learn about different devices in person. We even have a vape glossary available on our website!

All in all, a regulated mod is a device that is easy to use with little experience and is perfect for just about anyone. Unregulated mods will be the right way to go if you’re willing to learn the ins and outs, the to do’s and not to do’s, and if you’re interested in blowing those massive clouds! In later chapters, we’ll discuss how to build a coil as well as the safety measures that go along with building.

 

 

Chapter 4

ch3-blog-1_01

ch4-blog-notext_02 What better way to follow a chapter about rebuildable atomizers than to discuss how to build a coil for these types of atomizers!!Building your coils can be difficult at first, but don’t worry. Just like everything else, practice makes perfect. The best thing about knowing how to build your own coils is, it’s convenient! And in all reality, saves you lots of money.

A coil is the wire that is connected to the base, which in turn is connected to the battery or mod. When the battery is powered, the wires heat up and turn the e-liquid into vapor. Without a coil, there’s nothing to produce vapor. Coils are predominantly made with kanthal but can also be made with nickel or titanium depending on your personal preference. Nickel and titanium wire are only used for building when you’re attaching it to a mod that has temperature control functionality.

Building is the verb used when making a coil. This is done by wrapping wire tightly around a screwdriver to form a coil. Building coils take time and patience so don’t get frustrated when the first few don’t come out too good looking. The most important aspect when it comes to building is knowing build safety. If you’re building for a regulated mod, the manual that comes in the box will tell you the minimum resistance for that particular mod. You’re probably asking, what makes the difference in resistance when building a coil. The answer to that is what size screwdriver your using, what gauge wire, as well as how many wraps. The less wraps, the lower the resistance.

A wick is just the material inside a coil to hold and deliver e-liquid. This is usually made from cotton but can also be made with silica or mesh depending on what atomizer you’re using. Using mesh is mainly for building on genesis style atomizers.

 

What you’ll need:

  • Kanthal wire
  • 2mm Screwdriver (most rebuildable atomizers come with one)
  • Additional screwdriver or allen key that fits your atomizer screws
  • Needle nose pliers
  • Wire cutters
  • Scissors
  • Organic cotton
  • E-liquid

Wrapping Your Coil

Step 1: You’ll need about 3-4 in. of wire to build one coil. Place the wire above the 2mm screwdriver as close to the handle as possible and hold it firmly with your thumb.

Step 2: Then you want to start wrapping your coil until you’ve reached the desired number of wraps. You want the wraps to be as close together as possible without overlapping.

Step 3: Once you’ve reached the desired number of wraps, both leads should be facing the same direction.

Installing Your Coil:

Step 1: Take the deck of your RDA and loosen the screws just enough so that the wires can fit through. You don’t want to take the screws completely out because they’re easy to lose and hard to put back in when you’ve only got one free hand.

Step 2: Then with your coil still around the screwdriver, put one lead through the negative and the other through the positive.

Step 3: Try to position your coil towards the center of the deck. Once you’ve got it centered, you can now tighten your screws. Be careful not to tighten them too much because you could cut the wire and have to start all over.

Step 4: Now that you’ve tightened your screws, you can carefully position your coil more towards the center if it isn’t already by moving the screwdriver in whichever direction needed. Once you’re satisfied with this step, you can now remove the screwdriver and cut the extra wire off so that the leads are as close to the negative/positive posts as possible.

Eliminating Any Hotspots:

Briefly fire your mod until your coil is completely lit. Once your coil is lit, let go of the fire button and compress your coils with the pliers. Repeat this step until your coil lights up evenly from the center towards the outer wraps. Another way is to stroke the coils with a pair of tweezers. Once your coils light up evenly from the inside out, you’re all set to move on to the next step.

Wicking Your Coil:

Step 1: You want a piece of cotton that can fit snug inside of your coil, not to lose and not too tight.  Make sure that there is enough cotton that when folded, it can reach the bottom of the deck.

Step 2: Tuck the cotton under your coil.

Priming Your Cotton:

Simply saturate your cotton with your favorite juice, making sure to go over the coil so that the cotton inside is also saturated. Then place your RDA sleeve onto your deck and repeatedly fire your mod until your cotton is dried out but not burnt. Once you’ve done that place your cap back on, add more of your favorite juice, and vape on!

 

 

Chapter 5

ch3-blog-1_01

When buying your first e-cig, there are lots of things you should consider. Like whether or not you should purchase it in store or maybe online and why. Or all the items or products you’ll need to get you going when looking into becoming a vaper.

When you purchase at your local vape shop:

  • In person conversations about products and safety of different products
  • Hands on experience
  • You get to taste the eLiquid before you buy it
  • If you need to return a product, you can take it right back to the store instead of having to mail it back

When you purchase online:

  • Products delivered right at your door
  • Better chance for getting lower prices
  • Online stores are open 24 hours
  • More selection for various products

Depending on what you’re interested in getting, the necessities can differ. If you’re buying a regulated mod, a lot of them have internal batteries. These that are internal batteries, usually come with a charger. If the batteries are external, you’ll need to purchase batteries as well as a charger for those batteries. Another item you’ll need is, juice! Without juice, you can’t vape! If you’re buying a tank, you’ll need to purchase extra coils. If you’re buying a rebuildable atomizer, you might want to learn how to build your own coils. You can learn by different ways; in a vape shop, YouTube videos, and I’ve also written a blog on basic building steps! So to make it short, you’ll need a mod, an atomizer, batteries (if not internal), charger, and eLiquid.

Let’s face it… nothing beats personalized service. Especially if it is going to be your very first vape gear purchase. Another huge pro when it comes to just going to your local vape shop is, you get the chance to test your juice before you buy it! I mean, who want to buy juice that you’ve never tried. Probably not many. Now, if you already know exactly what you’re looking for, online could be the best route. This is because you can shop around hassle free to search for the best price. It all just dwindles down to what you’re looking for (or if you even know what you’re looking for), convenience, and price!

 

 

 

Top 3 Summer E-Liquids From Premium E-Cigarattes

Top 3 Summer E-Liquids From Premium E-Cigarattes

Vaping is the new big thing. It’s a fun way to get the nicotine you want without the hassle of cigarettes and without the chemicals that cigarettes contain. In the summer, especially, vaping can be a refreshing way to have fun. One of the reasons more and more people are turning to vaping is because of all the delicious flavors available. We’ve 3 e-liquid flavors perfectly suited for the summer that you’ll want to rush out and try as soon as possible.

SUMMER E-LIQUID FLAVOR #3: MR. GOOD VAPE KARMA CREAM ELIQUID
Karma Cream is a very popular dessert flavored e-liquid that brings some sweetness to your next vaping experience. This e-liquid has a creamy taste to it created by using two different types of creams and vanilla bean flavors, which is then perfectly contrasted by peach flavors. It’ll remind you of peaches and cream, making it ideal for the hottest days of the summer. The smoothness of the flavor makes it a delight to inhale and offers all of its sweetness when you exhale.

SUMMER E-LIQUID FLAVOR #2: COSMIC FOG THE SHOCKER E-LIQUID
When you want something with a bit of zing in it, this is the e-liquid to try. It features the delicious and refreshing taste of strawberries and all manner of tropical fruits as you inhale. Offering a delightful shock to your taste buds, you will find a citrus aftertaste that’s perfect for summer. The contrast between tart and sweet flavors makes this an option you’ll keep coming to again and again.

SUMMER E-LIQUID FLAVOR #1: HOLD FAST VAPORS DAVEY JONES LOCKER ELIQUID

For those who love the ocean and the sailing life, this is the e-liquid to choose this summer. Featuring a beautifully original label, you’ll also get flavors that’ll make you feel as if you’re right by the water. It has a delicious blend of mango, pineapple, and berries that is sweet with an edge of tartness. It’s a delightful choice for the pirate in everyone.

By trying these e-juice flavors, you’ll get into the spirit of summer, enhancing all of your experiences. Whether you like ultra smooth taste, sweet flavors, tart flavors, or all of the above, there is something for you to try at Premium E-Cigarettes.

The Vape Tank Evolution

The Vape Tank Evolution

Vape tanks have changed a great deal over the past few years. They have gone from simple cartridges to pieces of equipment that can be customized entirely. Vape tanks have gone from a simple factory filled cartridge to devices that can be rebuilt and filled with custom flavoring. Depending on the device, you’ll have many options to choose from in the vape tank you select to use.

Cartridges were one of the original e-liquid tanks made. These tanks were used for electronic cigarettes or cig-alikes. These were simply little plastic tubes filled with cotton holding liquid that was filled in a factory. These tanks would be pushed on to an atomizer which was the heating portion that produces vapor in the tank. They didn’t allow for any custom flavors or variation to customize the vaping experience.

The cartomizer was the next type of device produced. This was the same thing as a cartridge, however, the atomizer was attached. The atomizer being attached to the tank allowed for a new atomizer to be used each time the tank was changed for a full one. This increased the vaping experience by giving more flavorful vapor. These tanks are still produced today for cig-alike devices, and in most cases still are not able to be altered or filled with custom flavors.

Cartridges and cartomizers both prevented the very much expansion in the vaping industry. The tanks were produced by the company who made the battery and they usually have very few flavors to offer. The clearomizer was a huge change in the tank system of vaping devices. It would address some of the limitations of the cartridge system.

The clearomizer is used on portable vaporizers sometimes called vape pens. The tanks range in this category from factory filled and disposable to a device that can be made completely custom. The clearomizer that’s already filled when you buy it is stuck to the same limitations as the previous clearomzier. Some clearomizers are able to be filled with any of the many flavor options and hold varying amounts of e-liquid. They come in varying colors and designs. One large change was the introduction of glass tanks, you were no longer stuck to having only plastic. What makes these tanks so unique is they come in a rebuild-able variety. The devices allow for the coil to be replaced, and the cotton around the coil to be changed which allows the tank to be used longer than something disposable. They also contain wicks which can be changed. These parts being able to be changed saves the customer money, and allows for the tank to work like new even if you’re changing the flavor to something completely different than the tank held before. Another new feature found in the clearomizer tank system is varying the resistance in the coil. These variations are not as large as in tanks used on MODs but they do allow for a more custom user experience.

Tanks used on MODs would work very similarly to the clearomizer. There were not to many features added in these devices but the changes do make a large difference. These devices most notable entered vaping into the sub-ohm territory. This was done using changeable coils which also come in a rebuild-able version. Sub-ohm vaping allows for very strong flavor and large vape cloud production.

Vape tanks have evolved over the years. They’ve gone from something that came filled and disposable to something that could be used time after time and with many flavors. It’s clear to see that there have been a great amount of evolution in vape tanks.

Math and Chemistry Matter When it Comes to Vaping

Math and Chemistry Matter When It Comes to Vaping

While you don’t have to calculate mathematics, your drag may depend on it. Consumers do not diagram electricity flow to blow clouds like those coming from a hookah, but, how they pull the vapor, as they inhale, comes down to customizing devices which figure ohms, volts, and watts, in an equation to heat elements. Combustion, a behavior of particles is relating chemistry, but so are the aldehydes, aerosols, and assorted aroma liquids, that fill MOD tanks, ensuring the best Vape upon firing a switch.

The battery operated electrical current has been described as a funnel attached to a hose. Water flowing is the electricity, and when the water flows fast it represents friction causing an electrical course of heat. Water measured in gallons, electricity flow is measured in amps, and rating and more precise measuring power require watts, amps, and volts, with ohms, to hold-back flow. Ohm’s slows down electricity flow, providing numerical brakes, so the course won’t get so hot.

The tube found in the middle of a calibrated voltage battery encased in a box is known as a MOD. Homemade kits with science knowledge, or not, created do-it-yourself (DIY) units worth imitating. YouTube artists explain theories on how and why manufactured and homemade units persist. A lot of attention is paid to DIY creations; positive and negative tiny wires require finger dexterity–or they will short out. But do these units get the same result as already packaged units, that are affordable, but still out of reach to many? Spreading more math and science information will influence the public and push the industry safer. Horror stories blowing up the blower exist. Nothing stops a smoker; organics are as popular as ever. Looking at consumer risk can be a great selling point to the middle-man who’s part of the scene and on the look-out for the next great invention.

4 Main Clearomizer Problems

4 Main Clearomizer Problems

As with everything else in this world, there comes a time when you’ll have a problem with your vaping device. There’s no need to panic because all problems can be fixed. You may not see all 4 main problems during your vaping experience, but you will see at least 1 of the main 4 at some point. The 4 main problems you may see are: 1. burnt taste, 2. lacking airflow, 3. vapor production lacking, and 4. you clearomizer isn’t working properly.

1. BURNT TASTE

Having a burnt taste while vaping is the most common type of problem you may face with your vaping device. This problem arises often and frequently, especially if you don’t change the coil on time or get a bad coil.

The burnt taste comes from a bad coil or a coil that has been used longer than it should have been. When the coil isn’t receiving the proper amount of e-juice, it’ll burn the wick instead of the e-juice. The burning wick is what causes your e-juice to have a burnt taste to it.

One way to get rid of the burnt taste is to change the coil. If this doesn’t work then your e-juice may be too thick. When changing the coil doesn’t work, you may want to try a thinner e-juice.

2. AIRFLOW IS LACKING

Sometimes when you put the clearomizer back on your vaping device you may experience a lack of airflow. A lack of airflow may feel like you have a blockage or that the air is being cut off. The easiest solution to lacking airflow is to loosen your clearomizer from the other part of your device. If this solution does not work your e-juice may have made sludge inside your clearomizer. To get rid of the sludge you’ll need to clean your clearomizer and other parts of your device where the e-juice travels. Cleaning your device will help restore the airflow if loosening the parts does not.

3. VAPOR PRODUCTION IS LACKING

There are a few reasons why your vaping device may be lacking vapor production. The first thing you would want to check is the airflow. If the airflow is not sufficient enough then you would lack vapor production. You will want to adjust the airflow valves to the right position to get the proper vapor production.

Another solution to fix a lacking vapor production is to change the coil. An overused or bad coil can hinder vapor production. An easy solution would be to change the coil.

The third reason for poor vapor production would be the voltage. Some devices can use more than one coil which have different voltage to them. Changing to a higher voltage coil can improve vapor production. If the vaping device you are using can only use one coil then it would be the battery causing the problem. If it’s the battery then make sure to fully charge the battery to fix the lacking vapor production.

4. CLEAROMIZER IS NOT WORKING PROPERLY

There are 2 common reasons why your clearomizer isn’t working properly. Those  reasons are the coil and the coil not making proper connection with the bottom part of the device. The connection points not meeting properly is the main problem.

To fix the connection points you would need a flat head screwdriver. With the screwdriver you would maneuver the connector on the bottom part of the clearomizer down a tad. This would help to make the connections touch properly.

CONCLUSION

No matter if you’re a beginner or have been vaping for awhile, these clearomizer problems you may encounter. Whatever the problem is, you’ll be able to fix it and get your device working properly again.